Opening hours: Mon – Fri: 8:30am – 7:00pm | Saturday: 9:00am -4:30PM | Inside Post Office, 187 Uxbridge Rd, London W13 9AJ

Console & MacBook repair specialists.

Customer service – 020 8358 6752

🎮 Xbox · Repair guide

Xbox Series X No Signal? 7 Fixes Before You Panic

The console powers on, the fan spins, maybe you even hear the startup sound, but the TV insists there’s no signal. Work through these checks in order: most are free, and if it does turn out to be the HDMI port, it’s a £80 same-day repair, not a new console.

Rule out the easy stuff (2 minutes)

Before blaming the console, eliminate everything between it and the screen:

  1. Try a different HDMI cable. Cables fail far more often than ports. Use one you know works, not a spare from a drawer.
  2. Try a different TV input, then a different TV. A failed HDMI input on the telly looks identical to a failed console.
  3. Plug straight into the TV. Soundbars, AV receivers and 4K switches are frequent culprits, bypass them completely.
Checking the HDMI cable connection in the Xbox Series X HDMI OUT port
A known-good cable, fully seated at both ends, rules out the most common culprit.
Selecting the correct HDMI input on the TV with the remote
Match the TV input to the socket the Xbox is actually plugged into.

Console-side fixes to try

  1. Hard power cycle. Hold the power button for 10 seconds until it shuts fully, unplug the mains lead for 2 minutes, then boot.
  2. Force low-resolution mode. With the console off, hold the power and eject buttons together until you hear two beeps (power plus pairing on a Series S, which has no eject). The Xbox boots at 640×480, if a picture appears now, it’s a settings or TV handshake issue, not hardware.
  3. Check the port by eye. Phone torch into the HDMI socket: look for bent pins, debris, or a connector that wobbles when the cable is in.
Xbox video settings menu with resolution set to 1080p and 4K HDR options disabled
If you can get any picture, drop to 1080p and disable 4K/HDR to rule out a handshake issue.
Unplugging the Xbox Series X power cable at the wall to fully power cycle the console
A full power cycle: off, unplugged at the wall, then back on.
💡 Workshop tipWiggle the cable gently while the console is on. If the picture flashes in and out at certain angles, the port’s solder joints have cracked, that console will go fully dark soon, so book it in before it does.

When it’s the hardware: port or retimer

If the checks above change nothing, the fault is on the board. Two components cause almost every Series X and S no-signal case we see:

The HDMI port itself. It’s soldered straight to the motherboard, and every plug-in, tug and house move stresses those joints until they crack. Bent or pushed-in pins from a forced cable finish the job, we’ve covered that in detail in our bent HDMI pins guide.

The retimer IC. A small chip near the port that conditions the video signal before it leaves the console. When it fails you get a perfectly booting Xbox and a stubbornly black screen. Diagnosing port vs retimer needs bench testing, which is exactly what our console HDMI repair service does before quoting.

Boots fine, sounds fine, no picture: that’s an HDMI-side fault until proven otherwise.

The repair: £80, usually 2 to 3 hours

At our West Ealing workshop, Xbox Series X HDMI port replacement is a fixed £80 for both Series X and Series S: free check first, a new port fitted with hot-air rework, full retest under load, and a 90-day warranty. Most consoles dropped off in the morning are collected the same afternoon. There’s a full cost breakdown on our Xbox HDMI replacement pricing page.

Series X still showing no signal? Walk in with just the console, no appointment needed: Inside Post Office, 187 Uxbridge Rd, London W13 9AJ. Free check, fixed price before any work, most HDMI jobs done in 2 to 3 hours.
WhatsApp us a photo

Xbox no-signal FAQ

Why does my Xbox Series X say no signal but the console is on?
Power and video are separate systems: the console can boot perfectly while the HDMI port or the retimer chip that drives the video signal has failed. If two cables and two TV inputs change nothing, the fault is almost always on the console side, and it’s repairable for £80.
How much does Xbox Series X HDMI repair cost in London?
At TommyTech it’s a fixed £80 for the Series X and Series S, including the free check, the new port, labour and a 90-day warranty. Most are done in 2 to 3 hours.
Can a no-signal Xbox be something other than the HDMI port?
Yes, which is why we bench-test first. The retimer IC on the motherboard produces identical symptoms, and we repair that at board level too. You get an honest answer and a fixed quote before any work starts.
Will I lose my games or saves during an HDMI repair?
No. The repair is on the video output hardware only, your storage is never touched, and saves are synced to your Microsoft account anyway.
🔧
The TommyTech workshop team

Repairing Xbox, PlayStation, laptops and MacBooks from the same West Ealing workshop since 2018, rated 4.9 from 440+ Google reviews. Every guide comes from repairs we do at the bench daily.

Keep reading, or get it fixed

More from the bench, or skip the reading and bring it in.

Questions this guide didn’t answer? Call 020 8358 6752 or send us a message, we’re happy to advise before you book anything.

Xbox boots but the screen stays black?

Free check, fixed £80 HDMI repair, most consoles back the same day with a 90-day warranty.





Need help?

We are here

Opening hours

+444 reviews ⭐⭐⭐⭐⭐ Google

We offer express diagnostics

Warranty for any repairs!

TommyTech West Ealing
Best Repair Services in London
MacBook, iPhone, Laptop, iMac, Console

× How can I help you?